TECHNICAL SPECIFICATIONS
Installation Diameter

6, 8, 10 and 12 inch (150, 200, 250 and 300 mm)

Drinking water health effects

NSF/ANSI 61 OL190 ,  NSF/AINSI61 OL192 and BNQ 3660-950

Installation Method

 Pulled-in-Place Piping (PIPP)
Materials Composite of woven textile jacket with resin and polymeric membrane

Type of Liner

 Cured-in-Place Piping (CIPP)
Water tightness Meets ASTM F 1743
Installation Length Up to 500 feet (150 meters) between access pits.
Hazen-Williams Coefficient > 120
Density 1,15 g/cm³ (ASTM D792)

 

 
METHOD
 ASTM F 1216 AQUA-PIPE TM
Flexural Strength
ASTM D790
 > 31 MPa
(4 500 psi)		 > 45 MPa
(6500 psi)
Flexural Modulus
ASTM D790
 > 1 724 MPa
(250 000 psi)		 > 2 000 MPa
(290000 psi)
Tensile Strength
ASTM D638
 > 21 MPa
(3 000 psi)		 > 60 MPa
(8700 psi)